IP phone in BC12

[koobro]

Can someone tell me which commands to use to configure IP phone in BC12SP7/R4A. I'm talking about network info as IP addresses, gateway, etc, etc

 

[Isinor]

Hi,

The ELU-32 (Gatekeeper)
IPBOI:BPOS=1-0-32,IP=10.0.0.111,MASK=255.255.255.0;

The IP extension
GEDIIIR=1555,CSP=0,LIM=1;
IPEXIIR=1555,PASSW="1234";

Regards
Isinor

 

[koobro]

Isinor,

Do i repeat this for the number of ip phones i have to configure?

KooBro

 

[fouesnant]

Hi

GEDII and IPEXI are needed for each IPPhone you want to register within the MD110

 

[Isinor]

Hi,

How many extensions do you want?

Do you have several at a remote site? If so what bandwidth do you have to that site?

Are you going to use DHCP & Automatic gatekeeper discovery + Load distribution?

Because there are several other commands and issues when deploying VoIP using the MD110.

Regards
Isinor

 

[koobro]

I've 10 licenses, and we don't have a remote site. We're using dhcp & gatekeeper discovery. If I use ipexp command i see some of the phones are not registered whilst it had an IP this morning.

Rgds,

Koobro