IP-phone.cfg UK tones config

[quemzar]

Does anyone know what the UK tones config is in IP-phone.cfg.

I am getting the wrong tone when dialling out.

Any help would be welcome.

Here is extract from my setup.


[Tones]
Dial tone=
0,0, ; One cadence, One frequency
500,0,0,0,0,0, ; 500ms on, 0ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0,
1,0 ; Tone in Voice is on, sine wave

Special dial tone=
1,0, ; One cadence, One frequency
500,50,0,0,0,0, ; 500ms on, 50ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
1,0 ; Tone in Voice is on, sine wave

Busy tone=
1,0, ; One cadence, One frequency
500,500,0,0,0,0, ; 500ms on, 500ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
1,0 ; Tone in Voice is on, sine wave

Alerting tone=
1,0, ; One cadence, One frequency
1000,4000,0,0,0,0, ; 1000ms on, 4000ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
1,0 ; Tone in Voice is on, sine wave

Congestion tone=
1,0, ; One cadence, One frequency
200,200,0,0,0,0, ; 200ms on, 200ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
1,0 ; Tone in Voice is on, sine wave

Special information tone=
3,4, ; Three cadences, Three frequencies
333,1,333,1,333,1000, ; 333ms on, 0ms off, 333ms on, 0ms off, 333ms on, 1000ms off
950,-10,1400,-10,1800,-10, ; 950Hz, -10dbm0, 1400Hz, -10dBm0, 1800Hz, -10dBm0
1,0 ; Tone in Voice is on, sine wave

Call waiting tone=
2,0, ; Two cadences, One frequency
200,600,200,3000,0,0, ; 200ms on, 600ms off, 200ms on, 3000ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
1,0 ; Tone in Voice is on, sine wave

Offhook queuing tone=
1,0, ; One cadence, One frequency
2000,990,0,0,0,0, ; 2000ms on, 990ms off, 0ms on, 0ms off, 0ms on, 0ms off
1400,-10,0,0,0,0, ; 1400Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
1,0 ; Tone in Voice is on, sine wave

[LEDs]
Cad0=185,5,5,5 ; LED flash 0 cadence, first on,first off,second on,second off: in a call
Cad1=50,50,0,0 ; LED flash 1 cadence: incoming call
Cad2=30,30,0,0 ; LED flash 2 cadence: call parked

[RingCads]
Internal=20,100,0,1,0,0 ;Internal ring cadence
External=7,6,7,100,0,0 ;External ring cadence
Callback=6,8,6,8,0,0 ;Callback ring cadence
Extra=6,8,6,8,6,8 ;Extra ring cadence

[DIFFSERV]
TrafficClass=5 ;Expedited forwarding
DropPrecedence=3 ;High drop precedence, recomended for EF

[WAP]
MaxAttempts=3
RetransPeriod=2000

[Time]
TIMEZONE=CET:60:0:040101:110101
NTP-server=153.88.30.100

 

[fidde]

Try this:

; [Tones] ; Tones for UK

; Dial tone=0,1,500,0,0,0,0,0,375,-10,425,-10,0,0,0,0
; Special dial tone=1,1,740,10,0,0,0,0,425,-10,550,-10,0,0,0,0
; Alerting tone=2,1,400,200,400,2000,0,0,375,-10,425,-10,0,0,0,0
; Busy tone=1,1,370,370,0,0,0,0,375,-10,425,-10,0,0,0,0
; Congestion tone=0,0,500,0,0,0,0,0,425,-10,0,0,0,0,0,0
; Special information tone=0,0,500,0,0,0,0,0,425,-10,0,0,0,0,0,0
; Offhook queuing tone=3,0,30,330,30,330,30,2000,425,-10,0,0,0,0,0,0
; Call waiting tone=2,0,100,100,100,5000,0,0,425,-10,0,0,0,0,1,0