I have 2 sites one with a BCM 450 r5 (MCDN installed) with H323 trunks and a MICS 7.0 (no MCDN which i woudlnt think would be necessary)connected to a Nortel VoIP gateway. The systems are connected via TWT MPLS. I can make "Intercom" calls across the VoIP trunks both ways just fine. When i make a call from the MICS digital set throught the VoIP gateway to a IP set on the 450 the call is fine however when an IP set on the 450 transferes the call the signalling is there and the call is connected but there is no voice either way. I have checked gateway settings, made sure codec's are the same on both the BCM and VoIP gateway. Any one have an idea or no of any limitations causing this with the Nortel VoIP gateway? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP phone can not transfer calls from a Nortel VoIP Gateway
- Thread starter stik62
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question