IP Ofice with Frame rely & ISDN PPP

[deltaserver403]

Hi.

We are using IPO 403 2.1(27) with WAN3 module between two sites, frame rely link is terminated one port of WAN3 module, this is working great between 2 sites,

Now our boss wants take ISDN point to point from onther service provider & hook up IPO as back up link.

My woory is

How to configure the ISDN point to point in IPO as back up link & waht hard ware do we need to set up the same

Any help greatly appriciated

 

[crashtest1000]

On the service that you have set up for the Frame put the number of the other site then set up the dialup bandwidth.

If the Frame service stops it automaticly should dial the ISDN number that you put on the dialup.

Sounds to easy but I have hard it works try it after hours by pulling the frame out and see what happens