I have been replacing Windows VM servers with application servers as we upgrade to 11.1 SP X (2 or 3)
Have been running into a strange issue with most of these.
We program the 31 digit VM password in web interface for VM pro as well as the VM password in security setting in IPO.
Sometimes it will sync up sometimes it does not. The fix is to default the security settings on the IP500v2 and re program them. Once that is done it seems to work fine.
my questions is, Are there particular steps that should be done in sequence to get them to integrate easier?
Any help would be apricated.
Have been running into a strange issue with most of these.
We program the 31 digit VM password in web interface for VM pro as well as the VM password in security setting in IPO.
Sometimes it will sync up sometimes it does not. The fix is to default the security settings on the IP500v2 and re program them. Once that is done it seems to work fine.
my questions is, Are there particular steps that should be done in sequence to get them to integrate easier?
Any help would be apricated.