I have a vpn built between the main office and a remote site with a PRI. I installed a Patton m-ata connected and I can call from and to my cell phone no issue. When I monitor with my test set and call a fax and listen the distant end fax picks up and the transmission starts but after a few I get a busy signal. I have set the baud on the fax to 9600. Any suggestions would be appreciated
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Office r11.1 PRI with VPN to another site Patton M-ATA issue
- Thread starter mode1
- Start date
Similar threads
- Locked
- Question