IP Office r11.0.4
Two available 3rd Party Endpoint licenses
SIP User and SIP extension built
Bogen Multicast-2000 Paging system. Unfortunately it is only providing dial tone to us. We have another system that will only provide dial tone as well (different manufacturer)
Grandstream HT813 SIP ATA
What we would like to do it call the Grandstream device and have it connect us to the trunk that has been provided by the Bogen. We would then get dialtone and dial a zone for paging.
I can't get it to work and I'm wondering if I'm using the wrong device for the "hand off".
Does anyone have any experience doing this with one of these Grandstream HT 813 ATAs?
Does anyone have any other suggestions for the SIP ata/paging access device that have a proven track record with this scenario?
Two available 3rd Party Endpoint licenses
SIP User and SIP extension built
Bogen Multicast-2000 Paging system. Unfortunately it is only providing dial tone to us. We have another system that will only provide dial tone as well (different manufacturer)
Grandstream HT813 SIP ATA
What we would like to do it call the Grandstream device and have it connect us to the trunk that has been provided by the Bogen. We would then get dialtone and dial a zone for paging.
I can't get it to work and I'm wondering if I'm using the wrong device for the "hand off".
Does anyone have any experience doing this with one of these Grandstream HT 813 ATAs?
Does anyone have any other suggestions for the SIP ata/paging access device that have a proven track record with this scenario?
