IP Office Key and Lamp Operations

[cjinsocal581]

Anybody have this so called manual?

Cannot find it anywhere.

I am looking for the location of the Message button on the 54xx sets.

Thanks in advance.

 

[cjinsocal581]

Well, I found the document finally. It is located under the "PDF Files" under the 3.0 IPO documentation.

But where can I find the button location to Manager Programming fields?

e.g.

The Tab in the User Form - DigitalTelephony (formerly Button Programming)
1 - Appearance
2 - Appearance
etc.

 

[CarGoSki]

Search for Button Mapping. Beware that the button mapping for the Transtalk in 3.0 is incorrectly stated. Buttons 1-4 and 8-11 do not work. Only buttons 1 and 2 and 8 and 9 work.

 

[cjinsocal581]

Any ideas on the Message button? Or is it harcoded to the phone's bin file?

 

[CarGoSki]

The red lens at the top of the phone is the message waiting indicator. Is that what you are asking?

 

[cjinsocal581]

No, the actual button. Has an envelope on it.

 

[CarGoSki]

This is from the 5410 users guide.

2. Message lamp - Lit when the user has voicemail messages. Can also be set to
flash when the phone is ringing.
3. Previous/Next Page - Move through the different pages of the call
handling, speed dials and call log screens. Also used to move the cursor during
data entry.
4. Messages: Access the user's mailbox.


Perhaps I am unclear on the question. Can you rephrase it.

 

[cjinsocal581]

Yeah. I am sorry.

What I am looking to do is re-program the Messages button itself.

right now what it does is dial *17 respectively. I want to re-program it to automatically enter the user's extension and voicemail code.

So if you were to program a DSS button with VoicemailCollect and press it, it will bypass the "welcome to IP Office, please enter extension and pound sign" and go directly into voicemail.

 

[CarGoSki]

Hmmm. As far as I know, you can not reprogram a hard button. However what you desire can be programmed via softbutton.

If you are aware of that then your question becomes one of only trying to see if a hardbutton can be reprogrammed on a 54xx set.

 

[cjinsocal581]

Yeah I thought so. Already tried. The only way I was able to do it was to modify the bin file is our test environment.

 

[IPGuru]

if you dont want to be prompted for extn & password when retrieving VMail try switching IPO to IP Office mode & making sure that V<Extn> is set in source numbers

 

[JeSTeROCK]

If in intuity mode on vmpro also make sure you point the default collect start point to getmail so you don't have to enter the password