IP Office DECT Integration

[davea2]

Does anyone have any experience with the DECT (Kirk 1500) integration with the IP Office?

I cannot get inbound CLI to the 20DT handsets.
All other integration seems to work - Internal/External directory etc.
I get the IPO name of the person YOU are CALLING on the 20DT fine, but nothing incoming.
All DECT POT ports are sequentially numbered etc.

Tearing my hair out here, any help appreciated!

Thanks

http://www.ipofficeforum.co.uk

UK Based IP Office Discussion

 

[big70]

If i don,t use the Dect Licence can that give problems for making and recieve calls.

Greets Peter

 

[hohumIPO]

when using a Dect 1500 or 500 system there shoould be no need for licencing. Dave... have to checked under extension to be sure that Caller Display Type is set correctly?

 

[davea2]

You do need a licence for IPO DECT integration...
but these are present and correct.
CLI for all DECT POT ports is set to OFF as per the manual.
CLI should be provided by the integration functions....

This thing is supposed to go to site today

http://www.ipofficeforum.co.uk

UK Based IP Office Discussion

 

[davea2]

I am setting up an IPO with DECT server 1500.
The problem is, only 2 DECT handsets get voicemail message waiting and called number identity when calling other extensions.
Strangely, these are the first 2 ports on the DECT system.
The default PIN only allows the DECT server built in MSF (message service function) on the first 2 ports, although no information exists as to wether this may
also relate to Voicemail MWI.
Would anyone know if I am correct in assuming that the 2 are related and that I need another system PIN from Kirk Telecom?
Thanks

http://www.ipofficeforum.co.uk

UK Based IP Office Discussion