IP Office connected to Definity via H.323 w/conference center issue

[bwilch]

Greetings! I have an Ip Office 403 connected to an S8500 Definity. The 403 is running 2.1 (24) and the S8500 is running the latest firmware as well. Basically I have an H.323 trunk setup between the IP Office and Definity. I can transfer calls, make station to station calls, no problem. The one issue that is driving me crazy (more so than normal) is when I attempt to join a "meet me" conference or when I attempt to join a "power" conference using the "Conference Center". The issue appears to be the voice data is not being passed. I can tell I'm in the conference (I hear the beep, beep on the IP Office phone) but have no voice going in/out to the Definity phone.

I don't believe it to be a VCM issue, since I have a VCM 5 and the problem arises with just 1 call. So... here I turn to you guys for any suggestions. I'm not sure what other information to offer initially so I'll wait to see what questions you have to go foward. Thank you for any assistance you can offer.

 

[Morrack]

Can you create an ad-hoc conference from one of the digital sets on the 403? Ie, from an IPO phone dial another IPO phone, hit conf, dial a definity phone, hit conf.

Peter