Ip Office 2.1.27;16 site SCN, ANI at the hop off site..

[ksphoneman]

Sixteen site SCN in four different Area codes. Four sites have ISDN to the PSTN.
If using the LCR feature to route calls to a matching Area Code, when the call hops to the PSTN from SCN, a generic number is placed in the Calling Party Number field setup to the CO(ISDN).
Would prefer the NPA-NXX-E appear at the far end of the SCN call. Have tried using N.SxxxxxxE on the system short codes. However this seems to interfere with redial and log from the 4620 phones. Any thoughts?

 

[Spanning]

DISABLE FASTART

 

[IPGuru]

1) SCN only supports 15 sites.

2) it is usualy only posible to present a CLI that is valid for the outboud circuit. invalid requests will result in the base number being sent.

 

[VanZenden]

Have you tried that? (found it Manager guide, it might help)

SS - Pass through the Calling Party Number on VPN lines. For example, to provide the incoming ICLID at the far end of a VoIP connection, a short code ? with telephone number .SS should be added to the line.

 

[IPGuru]

SS used to send the inboud CLI presented at Site A accross a VOIP link so it can be displayed at site B

id site A is amking a call that breaks out of Site B, it will only be possible to send a Site B cli to the outside line