ip office 11.0 time alarm

[pccsipoffice]

Set up the IP office to email alarms. We are getting an email for
No response from the time server.
We initially set an ip for a time server that was later changed to
Voicemail/manager instead. We removed the IP address and put 0 0 0 0
back in the field. Still getting alarms after reboot.
What am I missing here?

http://WWW.MC-COMMUNICATIONS.NET

 

[IamaSherpa]

I think you're missing.. the time server ! If you declare vmpro/manager as TS you should declare the IP address and leave the application connected to the network. Anyway does not use 0.0.0.0 but 255.255.255.255, eventually

 

[budbyrd]

I usually set up the DNS and use time.google.com as my server.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

 

[Okkie26]

I use sntp.xs4all.nl

 

[pccsipoffice]

I will do the 255 thing. I am tempted to ask about the DNS set up. Thanks much.

http://WWW.MC-COMMUNICATIONS.NET

 

[pccsipoffice]

No response from Time Server. Last polled address: 255.255.255.255

http://WWW.MC-COMMUNICATIONS.NET

 

[pccsipoffice]

Am I still missing something? Embedded voicemail not Pro

http://WWW.MC-COMMUNICATIONS.NET

 

[TouchToneTommy]

System Settings, System Tab:
Time Setting Configuration Source: SNTP
Time Server Address: 0.pool.ntp.org 1.pool.ntp.org
Time Zone: Pick for your location

System Settings, DNS Tab:
DNS Server IP Address: 8.8.8.8
Backup DNS Server IP Address: 4.2.2.1

IP Route:
Ensure there is a route for 0.0.0.0 / 0.0.0.0 / {IP address of your default gateway} / LAN1

 

[pccsipoffice]

That's clear, I will do that TTT.
Thanks

http://WWW.MC-COMMUNICATIONS.NET