Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP NETWORKING PROBLEM

Status
Not open for further replies.

DEIVIDOS

Technical User
Nov 14, 2006
75
0
0
ES
hi,
I have a client in TSW sp3 with 2 PBX [PBX(A)--PBX(B)]joined with IP networking. The
parameters of the route are:

<ROCAP:ROU=70;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
70 7110000000000010 5 3110000001 0 30 128 03151515 011111100091 111111

END

<RODAP:ROU=70;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
70 TL65 H'00000001 H'00000001 H'00000000 NO

END

<RODDP:DEST=69;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
69 70 10450000000002500000000000 0 3 0

END

the case is the PBX(A) is joined with the PBX(B), and the PBX(B) is joined
with a movil corporative PRI.
when one extension in PBX(B)call to a corporative movil, and the movil
hang up the call without taking, the extension receive tone of communicating.Nevertheless
if one extension in PBX(A)call to a corporative movil, and the movil
hang up the call without taking, the extension not receive tone of
communicating

any ideas?
Thanks Best Regards
 
HI aau2 now all works fine.
THANKS FOR ALL
 
Now when one extension in PAX(A) call to one extenion in PBX(B), the extension in PBX(A)
it does not have call tone.
any ideas????
 
Hi,

Can you try change adc...

for example:

DEST ROU ADC
8950 99 26061000000002500060000010

It works fine...

Best Regards...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top