IP Networking between MD110 (BC13) and EBN 1

[abcruz]

Hi Everibody,

I would apreciate some help from somebody regarding this issue. The EBN has the main board, one CTS2 board and one CD3 board; The SW Version is R8.1/d010/v2.1(CPU/boot/DSP) and v5.2.4/v1.8 (xMV/boot).
I didn't find any technical documentation about EBN IP networking in the Info Channel. Does anybody could tell me were can I find it or how to connect and basic settings to have IP trunking between EBN and Mx-One (BC13)?

Thanks in advance,

Alberto Cruz

 

[TeleLion]

D010 is a very old release with many problems with VoIP, you need to opgrade first the EBN latest release is D049 now, basically EBN mode is easy to configure, all the IP phones register towards the MX-ONE, when the link between the MX-ONE and the IP phones is down, the phones reregister to the EBN, MDE configuration is a little more complex, please provide more information on how you want your system configured.

To MD or not to MD that is the question