bobbyforhire
Technical User
Ok so i was running a t1 groing from router1 to router 2.
---PIX-->ROUTER 1----ROUTER 2---SERVER
Was working great i just used the following
R1 -
ip nat inside source static tcp ROUTER2IP 80 interface Ethernet0/0 80
R2 -
ip nat inside source static tcp SERVERIP 80 interface Serial0/0 80
but since i put in my Multilink it just doesn't want to work.
R1 - I created the multilink with two T1'S and grouped them together.
R2 - Same thing as above
ip nat inside source static tcp SERVERIP 80 interface Multilink 1 80
ill post configs when i get home but this one is really killing my noodle....CCENT this WEDNESDAY!
---PIX-->ROUTER 1----ROUTER 2---SERVER
Was working great i just used the following
R1 -
ip nat inside source static tcp ROUTER2IP 80 interface Ethernet0/0 80
R2 -
ip nat inside source static tcp SERVERIP 80 interface Serial0/0 80
but since i put in my Multilink it just doesn't want to work.
R1 - I created the multilink with two T1'S and grouped them together.
R2 - Same thing as above
ip nat inside source static tcp SERVERIP 80 interface Multilink 1 80
ill post configs when i get home but this one is really killing my noodle....CCENT this WEDNESDAY!