Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ip-interface

Status
Not open for further replies.

banny3105

MIS
Oct 19, 2004
27
ZA
Cannot change any ip-interface
The following error display
Error encountered, can't complete request; check errors before retrying
 
You need to "disable" it before changing anything.

"change ip-interface 01AXX"

Enabled? n

save this.

then you can go back and change other things...

Mitch


AVAYA Certified Specialist
 
Either the system is doing something else and you'll have to wait or you have corruption.

If it's corruption you'll have to raise a case with Avaya to clear it.
 
Thanks Guys. The problem was corruption. Logged a call with Avaya and it is fix. Why will only two port network loss packets.
 
Are you asking another question?

Avaya recommends that any network port be hard set to 100/Full. Check your network switches and hardware. Also ensure any IP cards in your Avaya are set to 100/Full. A miss match between Avaya and the network can cause latency.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top