Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP DECT IN BP250

Status
Not open for further replies.

djmoutt

Programmer
Jun 9, 2007
11
UY
Anyone know how to configure IP DECT in BP250.
I have a PBX with cpud5 BP250 and Sipu and antenna dect ip ipbs2/ipbs432,
and I want to set for DT390 phones functions with this system
I have the BMS for R18 (9.1), but not much help.
Someone already configured these products
 
is already configured before a couple of questions:
1 sw version of Sipu
2 sw version of rfp32 not IPBS (because not supported on BP250)
 
Why do you say that ip dect ipbs432 not work with BP250.?
My CPU-D5 is RYS102548 R1N / 1 and / 2
  RYS102284 / 1
  RYS102285 / 1
  RYS102286 / 1 R2B.

The setup menu is equal to Ascom.
I have a manual configuration for MX-ONE on Ascom IP-DECT system.

For MX-ONE works?
 
the ascom ip-dect only works on mxone and aastra 400/5000 and another vendor (es.avaya) but at bussiness phone is only compatible rfp32 e RFP L34
see the link is the page of the BP250 aastra

also if you look at the help of the BMS has written all about it, you have to try Sipu or IPDECT or RFP32
 
Another query, suppose I have a mx-one, if I connect the antenna IPBS432, I can link the phone DT-390 to MX-ONE.
 
yes you can subscribe dt 390 dt 690 dt 4x3 and another dect important that supports the protocol gap example ascom d41 or d61 siemens cordless ecc..
 
Thank you. another query
Has anyone tried any such IP phone (Yealink, Grandstream or Snom)
SIPU plug in the BP250. Or just phone owners can connect as DBC44XX or Aastra.

thanks
 
I have tested Snom, Aastra, Polycom, Siemens and some other with Sipu.
 
I tested linksys, sipura, client android (but in release r1a restart sipu) and grandstream
 
BP250 could test that works with IP-DECT, Sipu to swicth with poe and ipbs432 antenna, set a parameter in the antenna, user and password in SIP extensions and not many things more. But it works great, now I'll try with asterisk, then tell them
 
great , my graduation project was implementation of asterisk communication engine.
what will you try IP-DECT or sip DECT

Regards,
Ismail
 
I'll try Ascom IP-DECT IPBS 432, as Was your project?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top