IP Dect Base with CUCM

[tpit]

thread851-1624691

Above post is a reference. I am experiencing the same behaviour. I know CUCM does not care about MAC addresses when dealing with these sip clients. But somehow I cannot get more than one profile to activate in one base station.

The base station (Siemens A580 IP) can create 6 sip accounts. But only one succeeds in registering at a time.

How can I have more than one profile from the same ip address?

_________________________________
It works! But how?
VoiceByte System Engineer

 

[Silverblade]

I know this problem

It is possible to register multiple devices from 1 and the same ip address (but with different mac addresses).
But there is a BIG IF here.
Each device has to register with a different port number.

Probably the siemens isn't able to do this and then you can only have 1 registered sip device at a time.

 

[tpit]

Thanks for your Reply silverblade. I already decided to roll out all dect bases. So every handset has an IP base now. Very ugly, but I guess it will have to do.

_________________________________
It works! But how?
VoiceByte System Engineer