IP connect

[tone70]

Good afternoon all, We have a PN at an office location which is connected via a pt-pt T!, which we'd like to get rid of and save the $350 bucks a month we're paying for it by going with IP-connect. I know that I'll need a IPSI, Clan & MedPro. Will we need to get a new license file generated as well? Any advice on the do's & dont's & the "gotchas" will be greatly appreciated.
Thanks In Advance.

 

[simreal]

Make sure you have adequate network bandwidth and QoS settings in place for the control traffic as well as the voice (rtp) traffic to/from the remote site.

The configuration is pretty straight forward but if you don't have a solid network the remote shelf will bounce in and out of service.


- Miguel

A very wise and well respected man once told me "Shut Up!".

 

[PBXTech]

Describe your system please.

'Knows enough to be dangerous. Wait... make that really dangerous.'

 

[tone70]

S8730, CM 5.1, PN's 1&2 IP connect, other PN's are either fiber connected, and the one I want to change is connected via a pt-pt T1.