Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Address
- Thread starter glmyers
- Start date
ZeroZeroOne
Vendor
For Legacy phones (H.323, Digital, Analog) you can run the command "status station xxx" in Communication Manager.
You can also find the command in System Manager under Elements / Communication Manager / Endpoints / Manage Endpoints. Check the box to select a station the use the Maintenance dropdown menu and select status.
SIP stations always show Disconnected in Communication Manger so you need to be in System Manager under Elements / Session Manager / System Status / User Registrations.
You can enable the Filter to search for a specific Address, Name, Etc.
A SIP station that is logged in will have the Address and IP Address fields populated, along with the Registered Session Manager(s).
There's a lot more information available in User Registrations but that should get you started.
You can also find the command in System Manager under Elements / Communication Manager / Endpoints / Manage Endpoints. Check the box to select a station the use the Maintenance dropdown menu and select status.
SIP stations always show Disconnected in Communication Manger so you need to be in System Manager under Elements / Session Manager / System Status / User Registrations.
You can enable the Filter to search for a specific Address, Name, Etc.
A SIP station that is logged in will have the Address and IP Address fields populated, along with the Registered Session Manager(s).
There's a lot more information available in User Registrations but that should get you started.
- Thread starter
- #3
- Status
Similar threads
