Craig Tull
Programmer
This has me very frustrated, programming up a small system with only a few 5220 IP phones but cannot get message waiting lights to work, three phones tested so far with different extension numbers and mailboxes.
SX200ICP running 4.0.5.17
Copied IP COS from another systems form 3 that works and copied the voice mail COS from that system also, best I can remember it pretty much must be dis-allowed not to work.
I did start with a blank database instead of a default database as I would normally do (Did not want to deprogram all of the 20 default IP phones etc.) if I cannot get it figured out I may start all over with a default database.
Probably something really simple that I forgot.
Craig
SX200ICP running 4.0.5.17
Copied IP COS from another systems form 3 that works and copied the voice mail COS from that system also, best I can remember it pretty much must be dis-allowed not to work.
I did start with a blank database instead of a default database as I would normally do (Did not want to deprogram all of the 20 default IP phones etc.) if I cannot get it figured out I may start all over with a default database.
Probably something really simple that I forgot.
Craig
