Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP 1230 from Unistim to SIP

Status
Not open for further replies.

pabx1121

Programmer
Oct 16, 2013
109
IE
Folks converting a 1230 from Unistin (062ac8v) to sip any rls really. I am getting FW reading....then FW failed. Even if I try to update the Unistim its the same. Here is my 1230.cfg file. Also tried doing it with a 12xxBoot.cfg in BootC mode. I have got there in the end before but with much pain!!!, any ideas cheers

[FW]
DOWNLOAD_MODE FORCED
VERSION SIP12x0e03.02.16.00
FILENAME SIP12x0e03.02.16.00.bin
PROTOCOL TFTP
SERVER_IP 192.168.1.3
SECURITY_MODE 0
 
Thanks firebird. With some perseverance I managed to convert them. The 1140 I converted with rls 2 firmware but just trying to turn off extended features for the 1230 in order for it to not look for token licence. Was there any rls of firmware (sip) where it didn't look for token licence. Tried the turning off of extended features such as multiple logins etc. Cheers
 
I can't really help you on which ones used a token license. I do have a load of different versions on my ftp server.
Try my link below

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Cheers Firebird, I will try flashing some of these to the phone and see if they work. The earliest sip versions for 11 series didnt need a token so hopefully same for 12 series, thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top