IOS vpn with no-config-mode ?

[rpast]

Hello,

I need to configure a remote-access (dyn addr) vpn using a wildcard PSK with IKE mode config, on a Cisco 1750 that currently has a site-to-site (static addr) vpn terminating on the same interface. If this were a Pix, I'd enter 'no-config-mode' for the working site-to-site vpn to keep it from having an address assigned to the remote peer.

But how do I do this on an IOS vpn? I can enter 'no-xauth', but not 'no-config-mode' at the end of the 'crypto isakmp key...' command.

This should be easy, but I can't find anything written on it. Any ideas? Thanks.

 

[themut]

The option 'no-config-mode' only exits on PIX firewalls it does not exist on IOS routers. You only need the option 'no-xauth'.

 

[rpast]

Thank you very much. I will try this.