Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IOD040 00 or IOD040 01 error on CS1000e rls.5
- Thread starter dataalpha
- Start date
Certainly. Look up the error and just do what the book says.
I'll bet you could have looked it up faster than me, because it happened to you first
Here you go.
IOD0040 n TTY or printer n is not emptying the output buffer. Output circuitry on pack is faulty. The device is disabled. Probable fault is on pack in question. This information is also displayed on the maintenance display. If fault persists after pack is replaced, suspect:
1. Miscellaneous pack on active CPU
2. Other serial data interface
GHTROUT.com | FAQs | Recent Replies
I'll bet you could have looked it up faster than me, because it happened to you first
Here you go.
IOD0040 n TTY or printer n is not emptying the output buffer. Output circuitry on pack is faulty. The device is disabled. Probable fault is on pack in question. This information is also displayed on the maintenance display. If fault persists after pack is replaced, suspect:
1. Miscellaneous pack on active CPU
2. Other serial data interface
GHTROUT.com | FAQs | Recent Replies
- Status
Similar threads
- Locked
- Question
- Question