OVL 14 means "incorrect parameters", so you're probably entering it wrong. Try [pre]INV GENERATE ALL[/pre] or [pre]INV GENERATE CARDS[/pre] first, then do [pre]INV PRT ALL/CARDS[/pre] when its finished.
Also check that you have access to LD 117 as some lower accounts don't have the overlay.
Just key in INV GEN ALL
(Log out for e.g. 1/2 hour or more if you have loads of cards and digital sets etc)
Set up a capture file
Log back in and go back into LD 117 and key in INV PRT ALL
Save the capture file as e.g. Card and sets.csv
Then use Excel to view the data as it is easier.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
Thanks for Your replies:
I get the OVL msg when I type LD 117 and it stays out of the overlay, so I'm guessing being and old system it doesn't have the 117 overlay.
I Tried with a normal and then with admin2 users to no avail.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.