Inventory of all PENs (digital and analog) 1

[jgbmt]

Hi everyone,

How can I run a report to list all phones on a HiPath 4000 V5 system.

I need to see all active digital phones, active analog phones, inactive digital phones, inactive analog phones.

Thank you!

 

[donb01]

DIS-SDSU:ALL,,PEN,PER3;

That will give you a list of all PENs in the system with station number and status. This will generate a *LOT* of output, but it will include everything you want.

You can use PER2 for Analog cards and it will give you the station numbers, but not for the IP stuff. I'm not sure of the output of PER2 for SLMO cards - you would have to see if it includes the station number.

There is also a thing available in Assistant (I think - I know it is in V7) called HiPath Inventory Management that might be able to give you cleaner output.

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[nightlisa]

If you need software only stations, you can also try REGEN-SCSU, & depending on the version you are using you may need to do it twice.
Some of my 9006's require I run it once as ANATE and again with NON-ANATE, & some let me run REGEN-SCSU as ALL or ;. On my systems, the SDSU all - only shows me stations configured with PENS, but for me this will omit phantom's.

 

[sbcsu]

Open Comwin
Logon to system
Click on 'Macro'/ Start CBL
Open 'Examples' folder
Click on 'List Stations'

 

[donb01]

In the 4000, SCSU is for the Analog stations, and SBCSU is for the digital and IP stations, plus they renamed some of the popular AMOs into silly German words - HUNT = AUN, PUGRP = SA, DPLN = WABE, DEST = ZIEL. ( It takes a while to remember, even with a cheat sheet!

I have to check out that macro - didn't know about that one! )

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA