Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Invalid scsi termination
- Thread starter farley99
- Start date
Only drive, enable termination. Additional drive, disable termination. Then post back with the results.
Dang if they aren't going to take the fun out of SCSI. What controller are you using?
Ed Fair
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
Dang if they aren't going to take the fun out of SCSI. What controller are you using?
Ed Fair
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
- Thread starter
- #4
Depends on the drive and card. Normal connection is controller on one end and drive somewhere on the chain but best at the end. There should be a jumper on the drive that enables termination. Also a set of jumpers to set the drive address.
You can visit the drive manufacturer's site to get the details of jumper settings.
Ed Fair
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
You can visit the drive manufacturer's site to get the details of jumper settings.
Ed Fair
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
- Status
Similar threads
