thegenerallee
IS-IT--Management
I'm trying to add in an IP 2004 phone but every DN I've tried gives me an "Invalid DN" error message. I've confirmed they're available DNs through printing "ludn" but all fail me. Am I doing something wrong perhaps?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Invalid DN On IP 2004
- Thread starter thegenerallee
- Start date
- Status
- Thread starter
- #3
thegenerallee
IS-IT--Management
@PERRYPJ: Below is what's free. Trying to use 4 digits.
CUSTOMER 00 - UNUSED DNS:
8006 8111 8114 8295 8406 8423 8446 8463 8601 8603
8604 8605 8606 8607 8608 8609 8622 8623 8625 8626
8629 8630 8631 8632 8633 8634 8635 8637 8651 8653
8673 8690 8691 8693 8707 8710 8712 8724 8727 8728
8729 8741 8746 8747 8774 8789 8801 8808 8809 8810
8812 8813 8817 8818 8819 8829 8854 8867 8868 8870
8871 8872 8873 8875 8876 8877 8878 8879 8881 8883
8884 8885 8887 8888 8889 8890 8893 8894 8895 8896
8897 8898 8906 8912 8915 8917 8918 8920 8921 8922
8925 8929 8931 8932 8933 8938 8939 8940 8942 8943
8944 8945 8947 8948 8954 8955 8956 8957 8960 8964
8990 8991 8992 8993 8994 8996 8997
CUSTOMER 00 - UNUSED DNS:
8006 8111 8114 8295 8406 8423 8446 8463 8601 8603
8604 8605 8606 8607 8608 8609 8622 8623 8625 8626
8629 8630 8631 8632 8633 8634 8635 8637 8651 8653
8673 8690 8691 8693 8707 8710 8712 8724 8727 8728
8729 8741 8746 8747 8774 8789 8801 8808 8809 8810
8812 8813 8817 8818 8819 8829 8854 8867 8868 8870
8871 8872 8873 8875 8876 8877 8878 8879 8881 8883
8884 8885 8887 8888 8889 8890 8893 8894 8895 8896
8897 8898 8906 8912 8915 8917 8918 8920 8921 8922
8925 8929 8931 8932 8933 8938 8939 8940 8942 8943
8944 8945 8947 8948 8954 8955 8956 8957 8960 8964
8990 8991 8992 8993 8994 8996 8997
- Thread starter
- #4
thegenerallee
IS-IT--Management
Actually, I just realized what the issue was. The settings I was giving were pointing to a specific BCM when this phone won't need to talk to that BCM at all. Sorry for the mixup.
But just the same, I'm trying to set it up for one of our locations that has an Option 11. Would the IP address of the S1 and S2 servers need to be that of the Option 11 or the main PBX at the headquarters? And is there a way to find out what port would need to be used?
But just the same, I'm trying to set it up for one of our locations that has an Option 11. Would the IP address of the S1 and S2 servers need to be that of the Option 11 or the main PBX at the headquarters? And is there a way to find out what port would need to be used?
- Status
Similar threads
