We have connected our Avaya Intuity Audix system to our network and are having a problem getting the function keys to show up on the screen properly using DSA. Logging in via IP address works just fine but when prompted to enter the terminal type (4410), the function keys do not display properly. Any ideas, suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Intuity Audix and DSA function keys
- Thread starter jreagan01
- Start date
G van Hamburg
IS-IT--Management
If you login into the Intuity Audix, at the terminal type just press enter.
Instead of the Function keys, use the keys on the keyboard.
Just play with it and you'll find out.
If you did login with 4410 press controll + something(I forgot but try c,g,x,z)and you will be disconnected.
Plan your work............Work your plan
![[afro]](/data/assets/smilies/afro.gif "[afro] [afro]")
Instead of the Function keys, use the keys on the keyboard.
Just play with it and you'll find out.
If you did login with 4410 press controll + something(I forgot but try c,g,x,z)and you will be disconnected.
Plan your work............Work your plan
G van Hamburg
IS-IT--Management
Sorry, misread your question.
See if you can find the default terminal on the properties screen. I think default is VT100 and you should try changing it to 4410.
Plan your work............Work your plan
See if you can find the default terminal on the properties screen. I think default is VT100 and you should try changing it to 4410.
Plan your work............Work your plan
- Status
Similar threads
- Locked
- Question
- Question