On the IPO SOE 2.1(27), from an Adtran 600R, My data supply is in the WAN port. We are using the IPO SOE as the network. I've set up Lan1 with the usual private IP addess, I've setup Lan2 with a data vendor's provided public address and, enabled NAT. I've created an IP route with the vendor's provided gateway address and a destination of Lan2 leaving all other feilds blank. My customer was complaining of delays and lost pages while working a site causing her to loose previuosly inputted information. We moved the networking side to a router/switch and the problem seems to have disappeared. Is there a document I missed that could help clarify my setup?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!