Oct 1, 2007 #1 rbender77 MIS Joined Jun 4, 2007 Messages 60 Location US How does one go about making international calls? I have an IVS2.
Oct 1, 2007 Thread starter #2 rbender77 MIS Joined Jun 4, 2007 Messages 60 Location US Also, Cmd 1201 is set at 11. The previous phone guy left behind a list of access codes, but I don't know how to go about using them. Upvote 0 Downvote
Also, Cmd 1201 is set at 11. The previous phone guy left behind a list of access codes, but I don't know how to go about using them.
Oct 8, 2007 #3 pave35 Vendor Joined Mar 26, 2004 Messages 433 Location US ??? How are you attempting to call? 9+? Do other LD calls work and only international fail? What sort of trunks are you dialing out on? Upvote 0 Downvote
??? How are you attempting to call? 9+? Do other LD calls work and only international fail? What sort of trunks are you dialing out on?
Oct 9, 2007 Moderator #4 gbaughma IS-IT--Management Staff member Joined Nov 21, 2003 Messages 4,773 Location US In the US, international calls are blocked by default. It may not be a phone system problem, as much as a telco issue. Just my 2¢ -Cole's Law: Shredded cabbage --Greg http://parallel.tzo.com Upvote 0 Downvote
In the US, international calls are blocked by default. It may not be a phone system problem, as much as a telco issue. Just my 2¢ -Cole's Law: Shredded cabbage --Greg http://parallel.tzo.com
Oct 9, 2007 Thread starter #5 rbender77 MIS Joined Jun 4, 2007 Messages 60 Location US pave35, I'm hitting 9 + access code + country code + number gbaughma, we deal with international clients all of the time and haven't had this problem before to my knowledge. Upvote 0 Downvote
pave35, I'm hitting 9 + access code + country code + number gbaughma, we deal with international clients all of the time and haven't had this problem before to my knowledge.
Oct 9, 2007 #6 OzzieGeorge Programmer Joined Jan 14, 2005 Messages 2,646 Location AU If you are doing this from a Dterm and not seeing RST in the display, I would be checking with the carrier. Upvote 0 Downvote
If you are doing this from a Dterm and not seeing RST in the display, I would be checking with the carrier.
Oct 10, 2007 #7 grh959 Technical User Joined Nov 14, 2003 Messages 614 Location US Are you usding authorization codes or charge codes? What exactly is happening? Is this blocked on only one phone, several phones or all phones? Upvote 0 Downvote
Are you usding authorization codes or charge codes? What exactly is happening? Is this blocked on only one phone, several phones or all phones?