Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Internal Dialing restricted

Status
Not open for further replies.

atdjr123

Technical User
Mar 12, 2012
559
US
I am unable to make any internal calls on extension 210. I haven't any restrictions on this extension either. Whenever attempting to dial internally I get a busy. Report reads as follows when dialing voicemail *97. [2015-03-10 19:16:49] NOTICE[28546][C-00000054] chan_sip.c: Call from '210' (10.0.0.170:5063) to extension '*97' rejected because extension not found in context 'Dialplan2'.
[2015-03-10 19:19:06] VERBOSE[28546] chan_sip.c: -- Registered SIP '207' at 10.0.0.9:5064
[2015-03-10 19:19:07] VERBOSE[28546] chan_sip.c: -- Registered SIP '207' at 10.0.0.9:5063
[2015-03-10 19:19:08] VERBOSE[28546] chan_sip.c: -- Registered SIP '207' at 10.0.0.9:5062
DialPlan2 shows as the context in the SIP technology section for this extension. Any ideas???

Voice Connect Plus, Inc.
have a great day and a better tomorrow
 
I changed the context to "from-internal" and it cleared my problem. It appears that some of the old custom context dial plans that I created were still active after deleting them. Dial 9 restriction is still active even though I have the extension programmed to allow all calls with no restrictions. Is there anything that I can change in the Asterisk CLI to remove that restriction?

Voice Connect Plus, Inc.
have a great day and a better tomorrow
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top