Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Intermec EasyCoder E4 Printer programming

Status
Not open for further replies.
jcura

jcura

Programmer
Oct 18, 2002
34
PT
I have an Intermec EasyCoder E4 Printer, and I tried to download an image file in pcx format to the Printer memory, as described in Programmer’s Reference Manual - EasyCoder E4 Direct Protocol v2.10 (page 71) but I couldn't get any result...
I did something like that: IMAGE LOAD "RAM:brasao2.1", 4096, "S"
I have tried some differences, but nothing works.
I would appreciate help
Thanks
 
Status
Not open for further replies.

Similar threads

sysmatics
  • Question
Initialize a printer after printing a page
Replies
2
Views
849
sysmatics
sysmatics
vgulielmus
  • Locked
  • Question
Shared printer connected via USB
Replies
4
Views
1K
vgulielmus
vgulielmus
S
  • Locked
  • Question
Sharp BP-50C55 printer User Authentication box
Replies
0
Views
408
SMS1295
S
R
  • Locked
  • Question
2 users in the same office using 2 different printers both have"GET /eSCL/ScannerStatus HTTP/1.1 Host: localhost:" printed on the top of every paper t
Replies
1
Views
459
DrB0b
DrB0b
ayzal
  • Locked
  • Question
How to dispose old printers?
Replies
0
Views
244
ayzal
ayzal

Part and Inventory Search

Sponsor

Back
Top