Intergating Nortel IP Phone Into A Cisco Enviroment

[enderwiggins]

We just recently moved to a Cisco Jabber platform in our law firm, but still have some old Nortel / Avaya IP Phones (1140's & I2004's) that we would like to possibly integrate within the new platform.

Is there a away to reset the Nortel IP phones in order to allow for them to be used on our Cisco platform?

 

[RLSbutton]

There is a way to run the 1140Es on SIP Protocol, follow these instruction as best you can. I didn't do that great of a job on the video.

The I2004 are a bit more tricky, you can refer to the BCM forum and there were recently some posts about attempting to make an I2004 SIP.

https://blog.michaelfmcnamara.com/2011/01/avaya-ip-1100-series-ip-phone-upgrade-to-sip/

Joseph Sus Jr. Nortel Emetrotel Consultant

http://www.joetheucxguy.com

 

[RLSbutton]

Whoops the video was for converting a phone from SIP back to Unistim. Let me do a little more digging...

https://forums.networkinfrastructure.info/nortel-ip-telephony/convert-phone-from-unistim-to-sip/

https://pbxbook.com/voip/sipunifw.html

http://downloads.avaya.com/css/P8/documents/100102713

Joseph Sus Jr. Nortel Emetrotel Consultant

http://www.joetheucxguy.com