Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Interesting Problem M1 Opt 81C ITG Octel Analog Networking

Status
Not open for further replies.
PMcCallum50

PMcCallum50

Technical User
Mar 5, 2004
58
US
Setup is: 2 Opt81C with ITG ISDN IP Trunks configured and working. Each has Octel 350 which has Octel Analog Networking using typical LD to transfer messages. Pointed Octel to communicate over the ITG for Octel Analog Networking. Turned D Channel MSGO on and saw the call setups, no errors, and finally the release. Messages did not transfer. Using G.729A only on the ITG configuration. Returned the Octel to normal PSTN and the messages did transfer. Appears Octel Analog Networking has handshaking/compression that does not like G.729A? Any advice? Since this is unique to the ITG, thought it better to post here.
 
Status
Not open for further replies.

Similar threads

Everest67
  • Question
remote access to NORTEL 81c
Replies
3
Views
124
Firebird Scrambler
Firebird Scrambler
Sah219
  • Locked
  • Question
Add 3ed network group with intergroup switch 81c
Replies
0
Views
238
Sah219
Sah219
Mokpokpo Agbovon
  • Locked
  • Question
Analog Phone Programming
Replies
4
Views
432
Firebird Scrambler
Firebird Scrambler
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
224
bltodd
bltodd
LidLock Technologies
  • Locked
  • Solved
Option 11 SDI Cabling
Replies
4
Views
359
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top