Interconnect restriction for Trunk group and users

[T8keiteasy]

Peux tu me confirmer la config suivante ?

Hi,

I ve a question would need to be set up, but unfortunnatly I haven't possibility...

I have a user #1000 wich has interconnect #2

When dialing 9, it goes to a route list including two routes (route 1 and 2)

Trunk group associated to route 1 has interconnect # set to 11 (analog trunk)
Trunk group associated to route 2 has interconnect # set to 12 (BRI trunk)

Interconnect restriction is programmed so intercpnnect group 2 forbid access to interconnect group 11

What happens is user 1000 dials 0 ?

Will it be routed to route 12 ?

I know I could also use COR if this doesn't work

Regards

Now, it's about French users too !!!

 

[kwbMitel]

Pardon Moi?

Je ne parle francais pas.

Dial 0? did you mean dial 9?

If 9, should go route 12

If zero, need more info on zero.

*******************************************************
Hard work often pays off after time, but laziness always pays off now.

 

[T8keiteasy]

Hey kwbMitel !

You're right, to call outside 0 is used by the French instead of 9 in others country...and I wanted to mean "What happens is user 1000 dials 9" ? of course....

What seems interesting is that like COR's, route ARS thru list follows all the route !

Thanks for your presence on this forum...



Now, it's about French users too !!!