Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

intercom digit length 1

Status
Not open for further replies.

rsjonesy

Vendor
Nov 27, 2003
25
US
How do you change the digits from the default 3 to 4 digits on a TDA 100?
 
Go to NUMBERING PLAN - MAIN in the programming software and change the extension numbering schemes 01 through 04 from 1, 2, 3, 4 to 10, 11, 12, 13 (or whatever you desire them to be)

remember the trailing digits can only be none, one or two digits, but the leading digits can be up to three in length, but you must manually code them.

With up to 64 leading digit schemes it's flexible enough to acommodate just about anything you may need.

Good luck!



Pat MacKinnon
Omni telecommunications Inc.,
London, Ontario, Canada
e: [ pat & omnitel , ca ]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top