Interchangeable M7208 and T7208?

[jasonmerchants]

I currently have a couple sites with the M7208 deployed, and I have a few boxes of new T7208 that I'd like to swap out at those sites to help with the older, used equipment. I notice in the BCM that the M7208 and T7208 are both listed as the set that is on the line -- are they interchangeable? Can I simply pull the M7208 from the desk and drop in the T7208 (with the only work really being relabeling?)

Thanks in advance!

 

[curlycord]

Yes

If any of the sites are older BCM's or Norstar then some feature icons and message light may not work...display msg still works.




=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[jasonmerchants]

All sites are running BCM400 4.0.2 systems, if that helps to narrow down anything that might not work as expected.

Would there be any reconfiguration needed? I unfortunately don't have a test BCM at my office to be able to work with, so I'd be flying to the site with the new equipment and want as few surprises as possible... although I do realize that's not always something that can mitigated.

 

[norstarboy125]

You won't have any issues or surprises. You are good.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer