Guest_imported
New member
- Jan 1, 1970
- 0
I need that somebody tell me how i can dial a number in the MD110 and the PABX put me in Interalias film until i dial any number, think thats a auto attendant facility...
Thanks.
Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Interalias Answer Machine
- Thread starter Guest_imported
- Start date
- Status
Hi there !
As far as I know u can install the Auto. Attendant Machine in MD110 system. It is a out source / out band system to connected with MD110.
There are many sorts of module that you can choose. You just needs to programme certain extn. and initiate a new GH (Group Hunting)
GHDAP:GRP=A
GHGME:GRP=&&,DIR=A&&; GHGMI:GRP=,DIR=&&; GHGRI:GRP=(,LIM=),SERV=,TRAF=,SEL=,QUE=(,CUST=)<(,RLTC=)(,QIC=)>;
and programme the GH No. in Route Day & Night Category for following the Operator Consoles.
RODNE:ROU=&&(,TRU=&&)[,NIG=|,DAY=]; RODNI:ROU=&&(,TRU=&&)[,NIG=|,DAY=];
RODNP:ROU=A&&(,TRU=A&&);
hiescham's
Technical Support
As far as I know u can install the Auto. Attendant Machine in MD110 system. It is a out source / out band system to connected with MD110.
There are many sorts of module that you can choose. You just needs to programme certain extn. and initiate a new GH (Group Hunting)
GHDAP:GRP=A
GHGME:GRP=&&,DIR=A&&; GHGMI:GRP=,DIR=&&; GHGRI:GRP=(,LIM=),SERV=,TRAF=,SEL=,QUE=(,CUST=)<(,RLTC=)(,QIC=)>;
and programme the GH No. in Route Day & Night Category for following the Operator Consoles.
RODNE:ROU=&&(,TRU=&&)[,NIG=|,DAY=]; RODNI:ROU=&&(,TRU=&&)[,NIG=|,DAY=];
RODNP:ROU=A&&(,TRU=A&&);
hiescham's
Technical Support
- Status