I have looked but can not seem to find where the timers are listed as to what each one does. Does anyone know where that information can be found?
Senior home has a Legend 7.0 and a PRI. Analog phones are set to auto line select the 70 pool. Apparently they dial rather slowly and timeout. I did adjust timer 2 from 24 to 48 seconds. Since then they have 48 seconds between digits and the last digit times out after five seconds. This is perfect for them however I can not seem to add time for a specific scenario.
When going off hook and before dialing a digit the timeout is 5 seconds. I did adjust up each timer that was set to five secs and that did not do the trick.
Senior home has a Legend 7.0 and a PRI. Analog phones are set to auto line select the 70 pool. Apparently they dial rather slowly and timeout. I did adjust timer 2 from 24 to 48 seconds. Since then they have 48 seconds between digits and the last digit times out after five seconds. This is perfect for them however I can not seem to add time for a specific scenario.
When going off hook and before dialing a digit the timeout is 5 seconds. I did adjust up each timer that was set to five secs and that did not do the trick.