Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Intel PRO/100 S driver
- Thread starter jwant
- Start date
Hi,
The standard driver for that card is eepro100 . In the first instance and assuming its configured properly by the bios, you would just put the following in /etc/modules.conf (or maybe /etc/conf.modules on older linux versions) :
alias eth0 eepro100
Then see if its OK on a reboot...
Regards
The standard driver for that card is eepro100 . In the first instance and assuming its configured properly by the bios, you would just put the following in /etc/modules.conf (or maybe /etc/conf.modules on older linux versions) :
alias eth0 eepro100
Then see if its OK on a reboot...
Regards
- Status
