Hi,
I'm having some difficulties conf. a network that consist of one router (d-link 614+, latest firmware) and a IBM T42 with a Intel 2200BG wireless network adapter installed.
My accesspoint broadcasts the SSID and the thinkpad gets the signals but when it tries to logon to the net it fails.
This is what I've done.
1. DHCP on the router is up and running
2. DHCP on the thinkpad seems ok
3. Drivers and firmwares is the latest available
4. Cryptation is set the same way in both nodes
5. SSID is broadcasting
6 Channel is set to 6.
Any suggestions?
Plz let my know
Best regards
//H.A
L.H DC
I'm having some difficulties conf. a network that consist of one router (d-link 614+, latest firmware) and a IBM T42 with a Intel 2200BG wireless network adapter installed.
My accesspoint broadcasts the SSID and the thinkpad gets the signals but when it tries to logon to the net it fails.
This is what I've done.
1. DHCP on the router is up and running
2. DHCP on the thinkpad seems ok
3. Drivers and firmwares is the latest available
4. Cryptation is set the same way in both nodes
5. SSID is broadcasting
6 Channel is set to 6.
Any suggestions?
Plz let my know
Best regards
//H.A
L.H DC
