Integration Types

[heathersue]

Hi everyone,

Does anyone knwo how to find out the integration type between VM and Definity for a remote system? Can seem to find the command to use. Thanks!!

Heather

 

[Dunstan]

Yes you have a couple of places you can look. Probably the easiest is under the Audix fron end there is a screen like this


ASG Security Administration
AUDIX Administration
Customer/Services Administration
Feature Options
Internet Messaging Administration
Networking Administration
Software Management
Switch Interface Administration
System Upgrade
TCP/IP Administration
Unix Management
Voice System Administration


Choose the "customer Services Administration tab


Then follow the below screens
l Customer/Services Administration k



l System Verification k
x Alarm Management x x Verify System Installationx
x Backup x ---> x>Verify System Status
x Restore x x Verify CPU CMOS Settings
x Database Audits x View CPU CMOS Settings
x Diagnostics <------- Installed Hardware x
x Log Administration mqqqqqqqqqqqqqqqqqqqqqqqqqqqj
x System Management x
x>System Verification x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj

diagnostics....followed by system verification.

Scroll down under the results....you are looking for Definity over lan

something like this
x Voice System is Up x
x>Sysx Number of Purchased Voice Ports 36 x
mqqqqx Number of Voice Ports In Service 36 x
x Purchased Hours of Speech 623 -
x Used Hours of Speech 32
x Potential Hours of Speech 623 .
x switch_link : LAN x
x switch_release : DEFINITY OVERLAN x
x