Integrating OCTEL 300

[pabxdude]

Hi all;

I have an OCTEL 300 that is connected to the local AVAYA switch via APIC cards. This switch is networked to another AVAYA switch, and the remote system is using the OCTEL 300 as its VM. The two switches will be connected via a 10 channel T1 using QSIG.

My question is, what special programming is required for either the OCTEL or the AVAYA so that MWI will work across the T1 QSIG link.

Thanks.

 

[doktor]

This link will give you all documents for OCTEL 200/300.
Search for your AVAYA switch an APIC, and you will find the relevant documents.

http://support.avaya.com/japple/css/japple?PAGE=ProductArea&temp.productID=107797

///doktor