Integrating NEC 2000 to Cisco CCM4.1

[AntBan]

Hello All,
I am having trouble finding documentation on how to interoperate between a NEC 2000 and a Cisco CallManager. The Cisco.com web site only has an interoperability Application Note on the NEAX 2400.

Is the NEC 2400 and the NEC 2000 similar? Do they use the same circuit cards, and are the config commands the same?

Does the NEC 2000 do PRI QSIG?

Any sort of direction on this would be highly appreciated. I am dead in the water on this

Thx
AntBan

 

[OzzieGeorge]

The 2400 and the 2000 are completely different beasts. Yes it can do Qsig. Anything else I referr you to the people you bought the system from. If you currently have a Cisco and are trying to move to NEC then we may help but if it is the other way then why should we help you migrate away. Try the Cisco forum. Sorry to be so blunt but hey thats just me.

 

[grh959]

Try connecting with standard PRI. Use NI2 protocol. Try installing with standard PRI programming. I have done it on a couple of systems and seems to work OK.

Gary

http://www.gcti.com/contact.asp

 

[AntBan]

Thx for the response OzzieGeorge and grh959.

I will try the NI2 integration and contact NEC support.