Does anyone use or know of an Integrated Access Device manufacturer that would allow me to multiplex a DS3 down to the DS1s and then channelize the DS1s as you would with a DSU/CSU. I have found the Adtran Atlas 800, but I have not been able to find anything similar from other manufatcturers.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Integrated Access Device
- Thread starter randyb19
- Start date
Guest_imported
New member
- Jan 1, 1970
- 0
Alcatel Multiplexer (M1/3)
Telco Systems Multiplexer Edgelink100 M13 MUX
Carrier Access Corporation (CAC) Multiplexer (M1/3) Wide
Telco Systems Multiplexer Edgelink100 M13 MUX
Carrier Access Corporation (CAC) Multiplexer (M1/3) Wide
- Thread starter
- #4
Thanks for the info thear310, but what you listed were straight DS3 multiplexers. In fact, we already have CAC Widebanks here. What I am looking for is a unit that will combine a DS3 multiplexer and CSU/DSU functionality. Currently, we have a lot of real estate invested in all the rackmount CSU/DSU's that we us and we need to clean it up.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question