Integrate with paging system

[RICHTz]

Dear All,

I have TMOM board at HiPath 4000 V6 and i need to connect trunks channels from this TMOM baord to 2-Wire Paging System can anyone help me regarding the configuation from the HiPath 4000 V6 and also the harware connection.

Thanks all.

 

[sbcsu]

Does the paging system need an extension or a trunk connected to it or can it change?

 

[RICHTz]

the solution was designed to connect it with trunk from TMOM board

 

[sbcsu]

Does it give any details that you can show?

If you put a test phone across the pager do you get dial tone?

 

[RICHTz]

for the tmom board the pin assignment and connection is the same foe the tacsu board or different!

can advise hot will will be the configuration and the hardware connection between the tmom and the paging system.

 

[sbcsu]

If you can use a TACSU or SCSU to connect to the paging system it makes it a lot easier as it is only 2 wire.
From memory without notes you have to put an analogue extension (scsu) onto the TMOM and also the paging circuit.
Then ADD-TSCSU for the circuit.
The analogue extension added to the TMOM is polarity sensitive and so is the paging circuit.

If the solution was designed for the TMOM card do you have a configuration for it (AMO TSCSU) ?

 

[RICHTz]

gteerings, from the manual there are a configuration when will be used TMOM board for my design i will be used the TMOM board
141.4.2 TMOM Access
One circuit is configured on the TMOM module per public address system.
● Assign TMOM module
AD-BCSU:MTYPE=PER,LTU=number,SLOT=number,PARTNO=string;
● Assign code for public address system
AD-WABE:CD=key-num,DAR=RA;
● Add class of trunk
AD-COTAR=NTON;
● Assign the class of parameter
AD-COPAR=SACK&LSUP;
● Add trunk group
AD-BUEND:NO=number;
● Add trunk circuit
ADTSCSU:
COTNO=number,TGRP=number,DEV=SPKR,COPNO=number,SUPV=SUPV2,ACKT=SZ
ACK2;
● Assign a route to the public address system
AD-RICHT:TYPE=CD,CD=key-num,SVC=VCE,TGRP1=number;

now how will be the connection from the TMOM to paging,

waiting.

 

[RICHTz]

please follow this link to see the pin assignment for TMOM Board

http://www.4shared.com/photo/W328I3QTce/TMOM2_Pin_Assignment.html

waiting.