Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installing UC500 into flat LAN

Status
Not open for further replies.

BigFinn

MIS
Aug 28, 2003
64
GB
Hello,

how hard is it to roll out a UC without using a dedicated voice VLAN? For example, onto a site where end-to-end VLANs don't work? Has anyone on Tek-Tips done this?


What are the main steps to get the UC500 to work in this situation?


Go into VLAN.DAT on the UC and delete all VLANs except VLAN1? Let the phones get IP addresses from a Windows server DHCP scope, with an option 66 or 150 to point them to their TFTP server/CME? Put static routes (option 249) into the scope to permit access to the CUE web amdnin interface?


Is it as simple as that, or am I missing something obvious?


Thank you.

BF
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top