cycochris
IS-IT--Management
- Aug 23, 2004
- 187
On a Magix 4.0, can you install single line phones on a ETR Board? If so, what are the considerations?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations sizbut on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing Single Line Phones on a ETR Board
- Thread starter cycochris
- Start date
- Status
tdaugirdas
Technical User
No considerations - you can program the last 6 ports (top ones) to be regular T/R ports. You do it in system programming under extentions, ETR. Those ports will work exactly as if they were regular 016 T/R ports. You can program as many of those ports as you want to be T/R ports.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Tom Daugirdas,
President
STCG, Inc.
stcg.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
