Installing MDR2000 on Opt 11C

[marinekelsey]

Good Afternoon Everyone!
My shop just purchased an MDR2000 to collect CDR data from our Opt 11C so we can begin installing unoffical phone service. I have been tasked to find out how the MDR2000 installed? Are there any particular procedures I need can obtain from someone? Please help! Thank you in advance!!!
-Kelsey

 

[GHTROUT]

First - see what you have


LD22, REQ prt, TYPE cfn - that will include any ADAN CTY ports set up with call data. Look for USER CTY.

Add or change the above in LD17



LD21 REQ prt, TYPE cdb. Look for the "PORT" prompt because it must be defined with a TTY number

Add or change the above in LD15



LD21 REQ prt TYPE rdb, print all of them and review the prompts at the end of each route printout.

Add or change the above in LD16

Books for you are here

http://www.MicroMerl.com/

.



~

http://www.GHTROUT.com/